High Speed Door Safety Photocell

Lanxi Jiaoying Trading Co.,Ltd

High Speed Door Safety Photocell

Tech Information:

1.ensing type: Retroreflective (Standard type)

2.Sensing distance: 0.1 to 5m

3.Sensing target: Opaque materials of Min. ø60mm

4.Response time : Max. 20ms

5.Power consumption: Max. 4VA

6.Light source: Infrared LED(850nm)

7.Sensitivity adjustment: Adjustment VR

8.Operation mode: Selectable Light ON or Dark ON by VR

9.Control output: Relay contact output

10.Relay contact capacity: 30VDC 3A of resistive load, 250VAC 3A resistive load 

11.Relay contact composition: 1c

12.Relay lifetime: Mechanically: Min. 50,000,000 operation, Electrically: Min. 100,000 operation

13.Light receiving element: Photo IC

14.Indicator: Operation indicator: red, Stability indicator: green(The red lamp on Emitter of transmitted beam type is for power indication)

15.Insulation resistance: Min. 20MΩ(at 500VDC megger)

16.Insulation type: Double or strong insulation (Dielectric voltage between the measured input and the power: 1kV)

17.Noise resistance: ±1,000V the square wave noise(pulse width : 1) by the noise simulator

18.Dielectric strength: 1000VAC 50/60Hz for 1 minute

19.Protection:IP50(IEC standard)

20.Material: Case, Case cover: Heat resistant ABS 

21.Sensing part: PC(with polarizing filter: PMMA) :Unit weight

22.Approx. 208g

23.Individual:Reflector(MS-2)

24.Common:VR adjustment driver, Mounting bracket, Bolts/nuts

If you are interest in our items, please feel free to contact us: